PRIMARY LOOP / FACILITY SIDE
一次侧液冷管路及管路总成
Primary-loop liquid-cooling piping and assemblies
连接设施冷源与 CDU 的一次侧液冷管路及管路总成,按项目工况、管径、走向、支撑方式与接口形式设计制造。
Primary-loop piping and assemblies between the facility cooling source and the CDU, engineered to operating conditions, routing, supports and interface requirements.

设施侧管路,按工况完成结构设计与制造。
Facility-side piping engineered and manufactured to project conditions.
面向数据中心与智算中心的一次侧水路,围绕流量、压力、温度、管径、设备布置及现场安装条件完成管路结构设计、部件选型、制造、装配与检测。维特尔提供其中的管路及流体分配组件,冷却塔、冷水机组等设施设备由项目方提供。
For primary water loops in data centers and AI computing facilities, VITERN develops piping structures around flow, pressure, temperature, diameter, equipment layout and installation conditions, then manufactures, assembles and verifies the piping scope. Cooling towers, chillers and other facility equipment remain project-supplied.
- 01设施冷源至 CDU 的管路连接Piping connection from facility cooling source to CDU
- 02管径、走向与支撑结构适配Diameter, routing and support adaptation
- 03接口形式及现场安装条件确认Interface and installation-condition confirmation
- 04样件验证至批量制造与检测Prototype verification through batch manufacturing and inspection
